Skip to main content

Simulations With Nx

Download Simulations With Nx Full eBooks in PDF, EPUB, and kindle. Simulations With Nx is one my favorite book and give us some inspiration, very enjoy to read. you could read this book anywhere anytime directly from your device.

Simulations with NX

Simulations with NX Book
Author : Reiner Anderl
Publisher : Hanser Publications
Release : 2014-10
ISBN : 9781569904794
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

This book provides the necessary basics to perform simple to complex simulations with Siemens NX software. It is aimed at designers, CAE engineers, and engineering students. Based on NX 9 the following topics are covered in the book: Motion Simulation (MBD), Design Simulation FEA (Nastran), Advanced Simulation (FEA, CFD and EM) and the management of calculation and simulation data (Teamcenter for Simulation). Starting with brief theoretical introductions, each chapter contains learning tasks of increasing difficulty. Most of them are based on the CAD model of the legendary Opel RAK2. The CAD data and calculation results of all exercises can be found online. The exercises can be done in NX versions 8, 8.5, 9, 10 and probably later versions.

Simulations with NX Simcenter 3D

Simulations with NX   Simcenter 3D Book
Author : Reiner Anderl,Peter Binde
Publisher : Carl Hanser Verlag GmbH Co KG
Release : 2018-09-10
ISBN : 1569907137
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

Testing and optimizing digital products with Siemens NX and Simcenter 3D In times of Industry 4.0 the digitalization of the value-chain becomes more and more important. The so-called digital twin allows simulations that are very close to reality. This book provides all necessary basics to perform simple as well as complex simulations with NX and Simcenter 3D (former NX CAE). It is aimed at design engineers, CAE engineers and engineering students. The following topics are covered in the book: - Motion Simulation (MBD) - Design Simulation (FEA, Nastran) - Simcenter/Advanced Simulation (FEA, CFD and EM) - Management of Calculation and Simulation Data (Teamcenter for Simulation) Starting off with brief theoretical introductions each chapter contains learning tasks of increasing difficulty. Most of them are based on the CAD model of the legendary Opel RAK2. The presented methods are based on NX 12 and Simcenter 3D, the new 3D CAE solution. Revised topics in this edition are Motion Simulation with the new Simcenter Motion solver and post-processing in Simcenter 3D (FEA). The CAD data and calculation results of all exercises can be found online. The exercises can be completed in NX 11, NX 12 and probably later versions.

Engineering Analysis With NX Advanced Simulation

Engineering Analysis With NX Advanced Simulation Book
Author : P. Goncharov,I. Artamonov,T. Khalitov
Publisher : Lulu Press, Inc
Release : 2014-12-02
ISBN : 1483417328
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

If you’re interested in engineering analysis applications for various product development tasks, then you need to add this technical guide to your bookshelf. Written by a team of engineers at Siemens PLM Software, it provides deep insights about finite element analysis and will help anyone interested in computer-aided engineering. NX Advanced Simulation is a feature-rich system for multi-physics calculations that can be used to study strength and dynamics, aerodynamic performance, internal and external flow of liquids and gases, cooling systems, experimental engineering, and more. Whether you’re just starting out as an engineer or are an experienced professional, you’ll be delighted by the insights and practical knowledge in Engineering Analysis with NX Advanced Simulation.

Simulations with NX Simcenter 3D

Simulations with NX   Simcenter 3D Book
Author : Reiner Anderl,Peter Binde
Publisher : Hanser Publications
Release : 2018-09
ISBN : 9781569907122
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

In times of Industry 4.0 the digitalization of the value-chain becomes more and more important. The so-called digital twinallows simulations that are very close to reality. This book provides all necessary basics to perform simple as well as complex simulations with NX and Simcenter 3D (former NX CAE). It is aimed at design engineers, CAE engineers and engineering students. The following topics are covered in the book: -Motion Simulation (MBD) -Design Simulation (FEA, Nastran) -Simcenter/Advanced Simulation (FEA, CFD and EM) -Management of Calculation and Simulation Data (Teamcenter for Simulation) Starting off with brief theoretical introductions each chapter contains learning tasks of increasing difficulty. Most of them are based on the CAD model of the legendary Opel RAK2. The presented methods are based on NX 12 and Simcenter 3D, the new 3D CAE solution. Revised topics in this edition are Motion Simulation with the new Simcenter Motion solver and post-processing in Simcenter 3D (FEA). The CAD data and calculation results of all exercises can be found online at www.drbinde.de/index.php/en/204. The exercises can be completed in NX 11, NX 12 and probably later versions.

Parametric Modeling with NX 12

Parametric Modeling with NX 12 Book
Author : Randy Shih
Publisher : SDC Publications
Release : 2022-12-06
ISBN : 1630571687
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

The primary goal of Parametric Modeling with NX 12 is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses NX 12 as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of fourteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering. This book also introduces you to the general principles of 3D printing including a brief history of 3D printing, the types of 3D printing technologies, commonly used filaments, and the basic procedure for printing a 3D model. 3D printing makes it easier than ever for anyone to start turning their designs into physical objects, and by the end of this book you will be ready to start printing out your own designs.

Parametric Modeling with Siemens NX Spring 2020 Edition

Parametric Modeling with Siemens NX  Spring 2020 Edition  Book
Author : Randy Shih
Publisher : SDC Publications
Release : 2020-06-08
ISBN : 1630573809
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

The primary goal of Parametric Modeling with Siemens NX is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses Siemens NX as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of fifteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering. This book also introduces you to the general principles of 3D printing including a brief history of 3D printing, the types of 3D printing technologies, commonly used filaments, and the basic procedure for printing a 3D model. 3D printing makes it easier than ever for anyone to start turning their designs into physical objects, and by the end of this book you will be ready to start printing out your own designs.

Practical Unigraphics NX2 Modeling for Engineers

Practical Unigraphics NX2 Modeling for Engineers Book
Author : Stephen M. Samuel
Publisher : Design Visionaries
Release : 2004-04
ISBN : 0975437712
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

Practical Unigraphics NX2 Modeling for Engineers is a cost-effective, self-paced course in UGS NX2 software. The NX2 book includes practical exercises, self-tests, and timesaving tips that are applicable for both NX and NX2.This Unigraphics book is a joint effort by Design Visionaries to bring to life DV President Stephen Samuel's vision of compiling and publishing the NX training exercises that he has been creating for the engineering community for years. Like his Unigraphics training programs, this book is also project-oriented.Methods outlined in this UG book go beyond an academic use of Unigraphics-they are tricks of the trade that come from thousands of hours of actual use of Unigraphics to design some of the most difficult products in the world. In many cases, the examples and exercises emulate actual design work. The exercises provided in this UG book are classroom tested, and are guaranteed to give you the knowledge you need to learn NX2.

Siemens NX 2020 for Designers 13th Edition

Siemens NX 2020 for Designers  13th Edition Book
Author : Prof. Sham Tickoo,CADCIM Technologies
Publisher : CADCIM Technologies
Release : 2020-07-21
ISBN : 1640570950
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

Siemens NX 2020 for Designers is a comprehensive book that introduces the users to feature based 3D parametric solid modeling using the NX software. The book covers all major environments of NX with a thorough explanation of all tools, options, and their applications to create real-world products. More than 40 mechanical engineering industry examples and additional 35 exercises given in the book ensure that the users properly understand the solid modeling design techniques used in the industry and are able to efficiently create parts, assemblies, drawing views with bill of materials as well as learn the editing techniques that are essential to make a successful design. In this edition, four industry specific projects are also provided for free download to the users to practice the tools learned and enhance their skills. Keeping in mind the requirements of the users, the book first introduces sketching and part modeling and then gradually progresses to cover assembly, surfacing, and drafting. To make the users understand the concepts of Mold Design and GD&T, two chapters are added in this book. Written with the tutorial point of view and the learn-by-doing theme, the book caters to the needs of both novice and advanced users of NX and is ideally suited for learning at your convenience and pace. Salient Features Comprehensive coverage of NX concepts and techniques. Tutorial approach to explain the concepts and tools of NX. Detailed explanation of all commands and tools. Hundreds of illustrations for easy understanding of concepts. Step-by-step instructions to guide the users through the learning process. More than 40 real-world mechanical engineering designs as tutorials, 35 as exercises, and projects with step-by-step explanation. Four real world projects available for free download. Additional information throughout the book in the form of notes and tips. Self-Evaluation Tests and Review Questions at the end of each chapter to help the users assess their knowledge. Table of Contents Chapter 1: Introduction to NX Chapter 2: Drawing Sketches for Solid Models Chapter 3: Adding Geometric and Dimensional Constraints to Sketches Chapter 4: Editing, Extruding, and Revolving Sketches Chapter 5: Working with Datum Planes, Coordinate Systems, and Datum Axes Chapter 6: Advanced Modeling Tools-I Chapter 7: Advanced Modeling Tools-II Chapter 8: Assembly Modeling-I Chapter 9: Assembly Modeling-II Chapter 10: Surface Modeling Chapter 11: Advanced Surface Modeling Chapter 12: Generating, Editing, and Dimensioning the Drawing Views Chapter 13: Synchronous Modeling Chapter 14: Sheet Metal Design Chapter 15: Introduction to Injection Mold Design * Chapter 16: Concepts of Geometric Dimensioning and Tolerancing * Index (* For Free Download)

Parametric Modeling with Siemens NX Spring 2019 Edition

Parametric Modeling with Siemens NX  Spring 2019 Edition  Book
Author : Randy Shih
Publisher : SDC Publications
Release : 2019-05
ISBN : 1630572802
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

The primary goal of Parametric Modeling with Siemens NX is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses Siemens NX as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of fifteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering. This book also introduces you to the general principles of 3D printing including a brief history of 3D printing, the types of 3D printing technologies, commonly used filaments, and the basic procedure for printing a 3D model. 3D printing makes it easier than ever for anyone to start turning their designs into physical objects, and by the end of this book you will be ready to start printing out your own designs.

Siemens Nx 10 Nastran

Siemens Nx 10 Nastran Book
Author : Jaecheol Koh
Publisher : Unknown
Release : 2017-02-09
ISBN : 9781543023299
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

This textbook explains how to perform computer aided analysis by using NX 10 Advanced Simulation with NX Nastran solver. It starts with analyzing a cantilevered beam and builds up the reader's understanding of the concepts and process of structural analysis. Each chapter contains a typical example of analysis and is followed by a quiz to summarize the topics. In addition to the tutorial in each chapter, more commands and concepts are explained at the end of the chapter to help improve the reader's understanding. The method for concluding an analysis is presented at the end of the tutorial for typical cases. Topics covered in this textbook - Chapter 1 through 3: Introducing NX 10 and Basic Modeling Techniques. - Chapter 4: Cantilevered Beam - Chapter 5: Effect of Fillet - Chapter 6: Effect of Stiffener - Chapter 7: Subcase and Symmetry - Chapter 8: Static Equilibrium and Singularity - Chapter 9: Using Coordinate System in Constraining - Chapter 10: Using 2D Elements - Chapter 11: Using 1D Elements - Chapter 12: Analysis of Truss Structure - Chapter 13: Connecting 2D Meshes - Chapter 14: Using 1D and 2D Meshes - Chapter 15: Using 1D and 3D Meshes - Chapter 16: Analyzing Alternator Bracket - Chapter 17: Contact Analysis - Chapter 18: Analyzing Bearing and Housing - Chapter 19: Spot Welding and Bolt Connection - Chapter 20: Analysis of Press Fit - Chapter 21: Quality of Elements - Chapter 22: Buckling Analysis - Chapter 23: Modal Analysis - Chapter 24: Thermal Analysis - Chapter 25: Fatigue Analysis

Simulation of Fluid Power Systems with Simcenter Amesim

Simulation of Fluid Power Systems with Simcenter Amesim Book
Author : Nicolae Vasiliu,Daniela Vasiliu,Constantin CĂLINOIU,Radu Puhalschi
Publisher : CRC Press
Release : 2018-04-09
ISBN : 1351645161
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

This book illustrates numerical simulation of fluid power systems by LMS Amesim Platform covering hydrostatic transmissions, electro hydraulic servo valves, hydraulic servomechanisms for aerospace engineering, speed governors for power machines, fuel injection systems, and automotive servo systems It includes hydrostatic transmissions, automotive fuel injection, hydropower speed units governor, aerospace servo systems along with case studies of specified companies Aids in predicting and optimizing the static and dynamic performances related to the systems under study

Parametric Modeling With Ugs Nx6

Parametric Modeling With Ugs Nx6 Book
Author : Randy H. Shih
Publisher : Unknown
Release : 2008-09-01
ISBN : 9781585034864
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

The Primary Goal of Parametric Modeling with UGS NX 6 is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text uses UGS NX as the modeling tool and the chapters guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of ten tutorial style lessons designed to introduce beginning CAD users to UGS NX. Each lesson introduces a new set of commands and concepts, building on previous lessons.

Machine and Industrial Design in Mechanical Engineering

Machine and Industrial Design in Mechanical Engineering Book
Author : Milan Rackov,Radivoje Mitrović,Maja Čavić
Publisher : Springer Nature
Release : 2022
ISBN : 3030884651
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

This book gathers the latest advances, innovations, and applications in the field of machine science and mechanical engineering, as presented by international researchers and engineers at the 11th International Conference on Machine and Industrial Design in Mechanical Engineering (KOD), held in Novi Sad, Serbia on June 10-12, 2021. It covers topics such as mechanical and graphical engineering, industrial design and shaping, product development and management, complexity, and system design. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.

Space Modeling with SolidWorks and NX

Space Modeling with SolidWorks and NX Book
Author : Jože Duhovnik,Ivan Demsar,Primož Drešar
Publisher : Springer
Release : 2014-07-14
ISBN : 3319038621
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

Through a series of step-by-step tutorials and numerous hands-on exercises, this book aims to equip the reader with both a good understanding of the importance of space in the abstract world of engineers and the ability to create a model of a product in virtual space – a skill essential for any designer or engineer who needs to present ideas concerning a particular product within a professional environment. The exercises progress logically from the simple to the more complex; while Solid Works or NX is the software used, the underlying philosophy is applicable to all modeling software. In each case, the explanation covers the entire procedure from the basic idea and production capabilities through to the real model; the conversion from 3D model to 2D manufacturing drawing is also clearly explained. Topics covered include modeling of prism, axisymmetric, symmetric and sophisticated shapes; digitization of physical models using modeling software; creation of a CAD model starting from a physical model; free form surface modeling; modeling of product assemblies following bottom-up and top-down principles; and the presentation of a product in accordance with the rules of technical documentation. This book, which includes more than 500 figures, will be ideal for students wishing to gain a sound grasp of space modeling techniques. Academics and professionals will find it to be an excellent teaching and research aid, and an easy-to-use guide.

Siemens NX 12 0 for Designers 11th Edition

Siemens NX 12 0 for Designers  11th Edition Book
Author : Prof. Sham Tickoo
Publisher : CADCIM Technologies
Release : 2022-12-06
ISBN : 1640570128
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

Siemens NX 12.0 for Designers is a comprehensive book that introduces the users to feature based 3D parametric solid modeling using the NX 12.0 software. The book covers all major environments of NX with a thorough explanation of all tools, options, and their applications to create real-world products. In this book, about 39 mechanical engineering industry examples are used as tutorials and an additional 34 as exercises to ensure that the users can relate their knowledge and understand the design techniques used in the industry to design a product. After reading the book, the user will be able to create parts, assemblies, drawing views with bill of materials, and learn the editing techniques that are essential to make a successful design. Also, in this book, the author emphasizes on the solid modeling techniques that improve the productivity and efficiency of the user. Salient Features: Consists of 16 chapters that are organized in a pedagogical sequence. Comprehensive coverage of NX 12.0 concepts and techniques. Tutorial approach to explain the concepts of NX 12.0. Hundreds of illustrations for easy understanding of concepts. More than 39 real-world mechanical engineering designs as tutorials, 34 as exercises, and projects with step-by-step explanation. Additional information throughout the book in the form of notes and tips. Self-Evaluation Tests and Review Questions at the end of each chapter to help the users assess their knowledge. Technical support by contacting 'techsupport@cadcim.com'. Additional learning resources at 'allaboutcadcam.blogspot.com'. Table of Contents Chapter 1: Introduction to NX 12.0 Chapter 2: Drawing Sketches for Solid Models Chapter 3: Adding Geometric and Dimensional Constraints to Sketches Chapter 4: Editing, Extruding, and Revolving Sketches Chapter 5: Working with Datum Planes, Coordinates Systems, and Datum Axes Chapter 6: Advanced Modeling Tools-I Chapter 7: Advanced Modeling Tools-II Chapter 8: Assembly Modeling-I Chapter 9: Assembly Modeling-II Chapter 10: Surface Modeling Chapter 11: Advanced Surface Modeling Chapter 12: Generating, Editing, and Dimensioning the Drawing Views Chapter 13: Synchronous Modeling Chapter 14: Sheet Metal Design Chapter 15: Introduction to Injection Mold Design (For Free Download) Chapter 16: Concepts of Geometric Dimensioning and Tolerancing (For Free Download) Index

Tecnomatix Plant Simulation

Tecnomatix Plant Simulation Book
Author : Steffen Bangsow
Publisher : Springer
Release : 2015-06-09
ISBN : 3319195034
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

This book systematically introduces the development of simulation models as well as the implementation and evaluation of simulation experiments with Tecnomatix Plant Simulation. It deals with all users of Plant Simulation, who have more complex tasks to handle. It also looks for an easy entry into the program. Particular attention has been paid to introduce the simulation flow language SimTalk and its use in various areas of the simulation. The author demonstrates with over 200 examples how to combine the blocks for simulation models and how to deal with SimTalk for complex control and analysis tasks. The contents of this book ranges from a description of the basic functions of the material flow blocks to demanding topics such as the realization of a database-supported warehouse control by using the SQLite interface or the exchange of data by using XML, ActiveX, COM or DDE.

Parametric Modeling with NX 9

Parametric Modeling with NX 9 Book
Author : Randy Shih
Publisher : SDC Publications
Release : 2014-04
ISBN : 1585039047
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

The primary goal of Parametric Modeling with NX 9 is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses NX 9 as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of thirteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of the NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.

NX 12 Tutorial

NX 12 Tutorial Book
Author : Online Instructor
Publisher : Unknown
Release : 2019-07-02
ISBN : 9788193724101
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

NX 12 Tutorial is written to help new users to learn the basics of NX and some advanced solid modeling techniques. The Author guides readers through NX 12 with clear and step-by-step tutorials that help you to design solid models from day one. The first four chapters of this book cover the user interface, part modeling, assemblies, and drawings. After learning the basics, you can learn additional sketching tools, feature modeling tools, expressions, sheet metal modeling, some advanced assembly techniques, drawing annotations, simulation basics, PMI, and rendering.

Learning Autodesk Inventor 2022

Learning Autodesk Inventor 2022 Book
Author : Randy Shih
Publisher : SDC Publications
Release : 2021-08
ISBN : 1630574414
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

This book will teach you everything you need to know to start using Autodesk Inventor 2022 with easy to understand, step-by-step tutorials. This book features a simple robot design used as a project throughout the book. You will learn to model parts, create assemblies, run simulations and even create animations of your robot design. An unassembled version of the same robot used throughout the book can be bundled with the book. No previous experience with Computer Aided Design(CAD) is needed since this book starts at an introductory level. The author begins by getting you familiar with the Inventor interface and its basic tools. You will start by learning to model simple robot parts and before long you will graduate to creating more complex parts and multi-view drawings. Along the way you will learn the fundamentals of parametric modeling through the use of geometric constraints and relationships. You will also become familiar with many of Inventor's powerful tools and commands that enable you to easily construct complex features in your models. Also included is coverage of gears, gear trains and spur gear creation using Autodesk Inventor. This book continues by examining the different mechanisms commonly used in walking robots. You will learn the basic types of planar four-bar linkages commonly used in mechanical designs and how to use the GeoGebra Dynamic Geometry software to simulate and analyze 2D linkages. Using the knowledge you gained about linkages and mechanism, you will learn how to modify your robot and change its behavior by modifying or creating new parts. In the final chapter of this book you learn how to combine all the robot parts into assemblies and then run motion analysis. You will finish off your project by creating 3D animations of your robot in action. There are many books that show you how to perform individual tasks with Autodesk Inventor, but this book takes you through an entire project and shows you the complete engineering process. By the end of this book you will have modeled and assembled nearly all the parts that make up the TAMIYA® Mechanical Tiger and can start building your own robot.

Siemens NX 2021 for Designers 14th Edition

Siemens NX 2021 for Designers  14th Edition Book
Author : Prof. Sham Tickoo
Publisher : CADCIM Technologies
Release : 2021-05-28
ISBN : 1640571191
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

Siemens NX 2021 for Designers is a comprehensive book that introduces the users to feature-based 3D parametric solid modeling using the NX software. The book covers all major environments of NX with a thorough explanation of all tools, options, and their applications to create real-world products. More than 40 mechanical engineering industry examples and additional 35 exercises given in the book ensure that the users properly understand the solid modeling design techniques used in the industry and are able to efficiently create parts, assemblies, drawing views with bill of materials as well as learn the editing techniques that are essential to make a successful design. In this edition, four industry-specific projects are also provided for free download to the users to practice the tools learned and enhance their skills.