In Order to Read Online or Download Power Transformer Online Monitoring Using Electromagnetic Waves Full eBooks in PDF, EPUB, Tuebl and Mobi you need to create a Free account. Get any books you like and read everywhere you want. Fast Download Speed ~ Commercial & Ad Free. We cannot guarantee that every book is in the library!
Book Description :
This book is a printed edition of the Special Issue "Power Transformer Diagnostics, Monitoring and Design Features" that was published in Energies
Book Description :
The reliability of electrical energy networks depends on the quality and availability of their electrical equipment, e.g., power transformers. Local failures inside their insulation can lead to breakdowns resulting in high outage and penalty costs. To prevent these destructive events, power transformers are tested for partial discharge (PD) activity in a routine test before shipment. Furthermore, PD activity can be evaluated as a diagnostic measurement on-site (on-line or off-line) or be constantly monitored during service using the ultra-high frequency (UHF) method. In this thesis, a calibration procedure is proposed for the UHF method used in power transformers, which is lacking so far. The calibration process is required to ensure both reproducibility and comparability of UHF measurements. Only a calibrated UHF measurement procedure can be deemed reliable and eventually be introduced to supplement in (site-)acceptance tests of power transformers. The proposed calibration method considers two factors: The influence of the UHF sensors' sensitivity and that of the UHF instrument characteristics, including accessories like cables, pre-amplifier, etc. The UHF instruments' influence is corrected by using a defined and invariable test signal as a reference for all recording devices comparable to the calibration method used in IEC 60270 for electrical PD measurement. The sensitivity of the UHF sensor is addressed by a characterization of UHF sensors using the antenna factor (AF) measured in a special reproducible setup, i.e., a GTEM cell. In this thesis, a self-built GTEM cell is presented, which is oil-filled to address the environmental conditions inside a transformer where the sensor will be used. With such a cell, influences on the AF of UHF sensors are investigated, and it is shown that sensor sensitivities measured in an air-filled cell can be corrected to the oil environment. A practical evaluation of the proposed calibration procedure is performed in a laboratory setup on a distribution transformer with different UHF instruments and sensors using artificial PD signals and real high voltage driven PD sources. Finally, this thesis identifies future research topics, which may be needed to improve the proposed UHF calibration procedure for power transformers and the UHF method in general.
Book Description :
A cutting-edge, advanced level, exploration of optical sensing application in power transformers Optical Sensing in Power Transformers is filled with the critical information and knowledge on the optical techniques applied in power transformers, which are important and expensive components in the electric power system. Effective monitoring of systems has proven to decrease the transformer lifecycle cost and increase a high level of availability and reliability. It is commonly held that optical sensing techniques will play an increasingly significant role in online monitoring of power transformers. In this comprehensive text, the authors—noted experts on the topic—present a scholarly review of the various cutting-edge optical principles and methodologies adopted for online monitoring of power transformers. Grounded in the authors' extensive research, the book examines optical techniques and high-voltage equipment testing and provides the foundation for further application, prototype, and manufacturing. The book explores the principles, installation, operation, condition detection, monitoring, and fault diagnosis of power transformers. This important text: Provides a current exploration of optical sensing application in power transformers Examines the critical balance and pros and cons of cost and quality of various optical condition monitoring techniques Presents a wide selection of techniques with appropriate technical background Extends the vision of condition monitoring testing and analysis Treats condition monitoring testing and analysis tools together in a coherent framework Written for researchers, technical research and development personnel, manufacturers, and frontline engineers, Optical Sensing in Power Transformers offers an up-to-date review of the most recent developments of optical sensing application in power transformers.
Book Description :
"This book explores relevant theoretical frameworks, the latest empirical research findings, and industry-approved techniques in this field of electromagnetic transient phenomena"--Provided by publisher.
Book Description :
High voltage engineering is extremely important for the reliable design, safe manufacture and operation of electric devices, equipment and electric power systems. The 21st International Symposium on High Voltage Engineering, organized by the 90 years old Budapest School of High Voltage Engineering, provides an excellent forum to present results, advances and discussions among engineers, researchers and scientists, and share ideas, knowledge and expertise on high voltage engineering. The proceedings of the conference presents the state of the art technology of the field. The content is simultaneously aiming to help practicing engineers to be able to implement based on the papers and researchers to link and further develop ideas.
Book Description :
Partial discharges within power transformers emit electromagnetic waves. The current thesis aims to provide fundamental knowledge about measuring and interpretation of the electromagnetic signals. Investigations in laboratory are confirmed by several case studies. The applicability using electromagnetic signals for partial discharge measurements on transformer in the field is demonstrated under real test conditions.
Book Description :
This book gathers selected papers presented at the conference “Advances in 3D Image and Graphics Representation, Analysis, Computing and Information Technology,” one of the first initiatives devoted to the problems of 3D imaging in all contemporary scientific and application areas. The aim of the conference was to establish a platform for experts to combine their efforts and share their ideas in the related areas in order to promote and accelerate future development. This second volume discusses algorithms and applications, focusing mainly on the following topics: 3D printing technologies; naked, dynamic and auxiliary 3D displays; VR/AR/MR devices; VR camera technologies; microprocessors for 3D data processing; advanced 3D computing systems; 3D data-storage technologies; 3D data networks and technologies; 3D data intelligent processing; 3D data cryptography and security; 3D visual quality estimation and measurement; and 3D decision support and information systems.
Book Description :
The 3rd International Conference on Foundations and Frontiers in Computer, Communication and Electrical Engineering is a notable event which brings together academia, researchers, engineers and students in the fields of Electronics and Communication, Computer and Electrical Engineering making the conference a perfect platform to share experience, f
Book Description :
Energy and power are playing pivotal roles in social and economic developments of the modern world. Energy and power engineers and technologists have made our lives much more comfortable and affordable. However, due to the demands of the global population on resources and the environment, innovations of more reliable and sustainable energy res
Book Description :
This book presents select peer-reviewed proceedings of the International Conference on Frontiers in Smart Systems Technologies (ICFSST 2019). It focuses on latest research and cutting-edge technologies in smart systems and intelligent autonomous systems with advanced functionality. Comprising topics related to diverse aspects of smart technologies such as high security, reliability, miniaturization, energy consumption, and intelligent data processing, the book contains contributions from academics as well as industry. Given the range of the topics covered, this book will prove useful for students, researchers, and professionals alike.
Book Description :
This book focuses on oil-paper insulation included in power transformers, especially for EHV and UHV transformers. The importance on insulation ever increased due to a growing voltage rating of transformers. Within the last decades, although research on the transformer insulation and diagnosis methods has advanced a lot, the insulation of HV transformers remained more or less unchanged. The book is divided into five chapters; the first and second chapters explain the basics of oil insulation, while the third chapter focuses on paper insulation. The final two chapters deal with the methods and outcome of testing both techniques. The primary target audience for this book is graduate students and power system engineers.
Book Description :
Inspection and Monitoring Technologies of Transmission Lines with Remote Sensing helps readers build a thorough understanding of new technologies and world-class practices developed by the State Grid Corporation of China—the organization responsible for the world’s largest power distribution network. Monitoring the operational status of high-voltage transmission lines is critical in supply assurance and continuity. Given the physical size, geographical, and climate variances that transmission lines are subject to, remote sensing and inspection is a critical technology for power distribution organizations. This reference covers current and developing technologies, equipment, and methods for the safe and secure operation and maintenance of transmission lines, including satellite remote sensing technology, infrared and ultraviolet detection technology, helicopter inspection technology, and condition monitoring technology. Covers operational and technical principles, and equipment used in transmission line inspection and monitoring, with a focus on remote sensing technologies and solutions Covers power line fundamentals, remote sensing technologies, inspection technologies, fault detection technologies, and on-line monitoring Focuses on practical equipment and systems parameters to ensure readers are able to meet operational needs Covers control technologies that ensure safe and consistent transmission operation
Book Description :
Transformer Engineering: Design, Technology, and Diagnostics, Second Edition helps you design better transformers, apply advanced numerical field computations more effectively, and tackle operational and maintenance issues. Building on the bestselling Transformer Engineering: Design and Practice, this greatly expanded second edition also emphasizes diagnostic aspects and transformer-system interactions. What’s New in This Edition Three new chapters on electromagnetic fields in transformers, transformer-system interactions and modeling, and monitoring and diagnostics An extensively revised chapter on recent trends in transformer technology An extensively updated chapter on short-circuit strength, including failure mechanisms and safety factors A step-by-step procedure for designing a transformer Updates throughout, reflecting advances in the field A blend of theory and practice, this comprehensive book examines aspects of transformer engineering, from design to diagnostics. It thoroughly explains electromagnetic fields and the finite element method to help you solve practical problems related to transformers. Coverage includes important design challenges, such as eddy and stray loss evaluation and control, transient response, short-circuit withstand and strength, and insulation design. The authors also give pointers for further research. Students and engineers starting their careers will appreciate the sample design of a typical power transformer. Presenting in-depth explanations, modern computational techniques, and emerging trends, this is a valuable reference for those working in the transformer industry, as well as for students and researchers. It offers guidance in optimizing and enhancing transformer design, manufacturing, and condition monitoring to meet the challenges of a highly competitive market.
Book Description :
Measurement and Analysis of Overvoltages in Power Systems Jianming Li, Professor, State Grid Corporation, China A combination of theory and application, this book features practical tests and analytical techniques comprehensively with engineering practicality as its focus. Based on years of research and industry experience, the author introduces many scientific research methods such as overvoltage simulation studies, dynamic simulation experiment platform development and application, and overvoltage pattern recognition. Readers will get a good grounding in the various sources of overvoltages in power systems, methods in on-line measurements as well as explanations of overvoltage formation mechanisms and monitoring analysis methods. •Systematically examines sources, online measurements, analytical techniques, and simulations of overvoltages, with an emphasis on engineering practicality •Presents practical engineering examples analyzing overvoltages and improving system operation, based on field experiments and data analysis •Features overvoltage simulations and waveform analysis in transmission systems Measurement and Analysis of Overvoltages in Power Systems is intended as an all-in-one guide for engineers and researchers in power systems engineering. It can be used as a reference text for graduate students and lecturers of electrical engineering.
Book Description :
This book presents the proceedings of the 5th International Colloquium “Transformer Research and Asset Management,” held in Opatija, Croatia, on October 9–12, 2019. The papers chiefly focus on three groups of topics: 1. Numerical Modeling: Electromagnetic fields—Coupled fields—Transients—Numerical modeling in design 2. Materials, Components and New Technologies: Insulating materials—Magnetic materials and transformer noise—Transformer components—New transformer technologies 3. Transformer Lifecycle Management: Diagnostics and monitoring—Failure—Asset management—In-service experiences. The Colloquium was organized by the Croatian National Committee of CIGRE together with the Faculty of Electrical Engineering and Computing in Zagreb and the Centre of Excellence for Transformers
Book Description :
The editors of this Special Issue titled “Intelligent Control in Energy Systems” have attempted to create a book containing original technical articles addressing various elements of intelligent control in energy systems. In response to our call for papers, we received 60 submissions. Of those submissions, 27 were published and 33 were rejected. In this book, we offer the 27 accepted technical articles as well as one editorial. Authors from 15 countries (China, Netherlands, Spain, Tunisia, United Sates of America, Korea, Brazil, Egypt, Denmark, Indonesia, Oman, Canada, Algeria, Mexico, and the Czech Republic) elaborate on several aspects of intelligent control in energy systems. The book covers a broad range of topics including fuzzy PID in automotive fuel cell and MPPT tracking, neural networks for fuel cell control and dynamic optimization of energy management, adaptive control on power systems, hierarchical Petri Nets in microgrid management, model predictive control for electric vehicle battery and frequency regulation in HVAC systems, deep learning for power consumption forecasting, decision trees for wind systems, risk analysis for demand side management, finite state automata for HVAC control, robust μ-synthesis for microgrids, and neuro-fuzzy systems in energy storage.
Book Description :
This book embodies principles and applications of advanced soft computing approaches in engineering, healthcare and allied domains directed toward the researchers aspiring to learn and apply intelligent data analytics techniques. The first part covers AI, machine learning and data analytics tools and techniques and their applications to the class of several hospital and health real-life problems. In the later part, the applications of AI, ML and data analytics shall be covered over the wide variety of applications in hospital, health, engineering and/or applied sciences such as the clinical services, medical image analysis, management support, quality analysis, bioinformatics, device analysis and operations. The book presents knowledge of experts in the form of chapters with the objective to introduce the theme of intelligent data analytics and discusses associated theoretical applications. At last, it presents simulation codes for the problems included in the book for better understanding for beginners.
Book Description :
This book gathers the latest advances, innovations, and applications in the field of environmental and construction engineering, as presented by international researchers and engineers at the 2nd International Conference on Efficient Production and Processing, held on February 25-26, 2021. It covers highly diverse topics, including use of secondary raw materials in construction technologies; urban waste management logistics; use of recycled materials in road construction; safety and security in waste handling; food science and agriculture; waste and water treatment; and environmental economics. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.
Book Description :
A comprehensive reference and guide on the usage of the alternative dielectric fluids for transformer insulation systems Liquid-filled transformers are one of the most important and expensive components involved in the transmission and distribution of power to industrial and domestic loads. Although petroleum-based insulating oils have been used in transformers for decades, recent environmental concerns, health and safety considerations, and various technical factors have increased the need for new alternative and biodegradable liquids. Alternative Liquid Dielectrics for High Voltage Transformer Insulation Systems is an up-to-date reference and guide on natural and synthetic ester-based biodegradable insulating liquids. Covering the operational behavior, performance analysis, and maintenance of transformers filled with biodegradable insulating liquids, this comprehensive resource helps researchers and utility engineers expand their knowledge of the benefits, challenges, and application of ester-filled transformers. In-depth chapters written by experienced researchers addresses critical topics including transformer condition monitoring, high voltage insulation testing, biodegradable insulating material processing and evaluation, and more. A unique and significant contribution to existing literature on the subject, this authoritative volume: Covers condition monitoring, diagnostic testing, applications, maintenance, and in-service experiences Explores current challenges and future prospects of ester-filled transformers Discusses significant research progress and identifies the topics in need of further emphasis Compares the differences and similarities between mineral oils and ester liquids Includes in-depth behavioral observations and performance analysis of ester-based insulating liquids Alternative Liquid Dielectrics for High Voltage Transformer Insulation Systems: Performance Analysis and Applications is a must-have reference for utility engineers, electrical power utilities, transformer owners, manufacturers, and researchers.
Book Description :
A comprehensive reference and guide on the usage of the alternative dielectric fluids for transformer insulation systems Liquid-filled transformers are one of the most important and expensive components involved in the transmission and distribution of power to industrial and domestic loads. Although petroleum-based insulating oils have been used in transformers for decades, recent environmental concerns, health and safety considerations, and various technical factors have increased the need for new alternative and biodegradable liquids. Alternative Liquid Dielectrics for High Voltage Transformer Insulation Systems is an up-to-date reference and guide on natural and synthetic ester-based biodegradable insulating liquids. Covering the operational behavior, performance analysis, and maintenance of transformers filled with biodegradable insulating liquids, this comprehensive resource helps researchers and utility engineers expand their knowledge of the benefits, challenges, and application of ester-filled transformers. In-depth chapters written by experienced researchers addresses critical topics including transformer condition monitoring, high voltage insulation testing, biodegradable insulating material processing and evaluation, and more. A unique and significant contribution to existing literature on the subject, this authoritative volume: • Covers condition monitoring, diagnostic testing, applications, maintenance, and in-service experiences • Explores current challenges and future prospects of ester-filled transformers • Discusses significant research progress and identifies the topics in need of further emphasis • Compares the differences and similarities between mineral oils and ester liquids • Includes in-depth behavioral observations and performance analysis of ester-based insulating liquids Alternative Liquid Dielectrics for High Voltage Transformer Insulation Systems: Performance Analysis and Applications is a must-have reference for utility engineers, electrical power utilities, transformer owners, manufacturers, and researchers.