Mechanics Of Offshore Pipelines

Book Description :

Offshore oil and gas production was conducted throughout the entire 20th century, but the industry’s modern importance and vibrancy did not start until the early 1970s, when the North Sea became a major producer. Since then, the expansion of the offshore oil industry has been continuous and rapid. Pipelines, and more generally long tubular structures, are major oil and gas industry tools used in exploration, drilling, production, and transmission. Installing and operating tubular structures in deep waters places unique demands on them. Technical challenges within the field have spawned significant research and development efforts in a broad range of areas. Volume I addresses problems of buckling and collapse of long inelastic cylinders under various loads encountered in the offshore arena. Several of the solutions are also directly applicable to land pipelines. The approach of Mechanics of Offshore Pipelines is problem oriented. The background of each problem and scenario are first outlined and each discussion finishes with design recommendations. * New and classical problems addressed - investigated through a combination of experiments and analysis * Each chapter deals with a specific mechanical problem that is analyzed independently * The fundamental nature of the problems makes them also applicable to other fields, including tubular components in nuclear reactors and power plants, aerospace structures, automotive and civil engineering structures, naval vehicles and structures

Book Description :

Buckle propagation is a problem unique to offshore pipelines, in which the local collapse of a locally weakened section of the pipe initiates a collapse that propagates at high speed catastrophically flattening the line by kilometers. The lowest pressure that can sustain the propagation of the collapse, the propagation pressure, is only a small fraction of the collapse pressure of the intact pipe. The large difference between these two pressures requires that pipelines be designed on the collapse pressure, and the extent of the potential catastrophic damage suffered is limited by the periodic introduction of buckle arrestors to the line. Volume 2 of the book series Mechanics of Offshore Pipelines addresses the major aspects of buckle propagation including its initiation, establishment of the propagation pressure, and the dynamics of buckle propagation. Buckle propagation under tension, in pipe-in-pipe pipeline systems, and confined buckle propagation in tubulars such as grouted casing are examined in dedicated chapters. Three chapters deal with the performance of the most commonly used buckle arrestors under both quasi-static and dynamic buckle propagation. Each of these problems is studied through experiments, analyses, and large-scale numerical simulations. The results are used to provide empirical design equations and design guidelines on how to mitigate the effects of buckle propagation. Buckle propagation and arrest approached from both fundamental and applied points of view Provides data, empirical design formulae, and design guidelines Teaches how to analyze buckle propagation and mitigate its effects through experiment and modeling Based on the 40-year research and practice of the most eminent researcher in the subject

Book Description :

Offshore oil and gas production was conducted throughout the entire 20th century, but the industry's modern importance and vibrancy did not start until the early 1970s, when the North Sea became a major producer. Since then, the expansion of the offshore oil industry has been continuous and rapid. Pipelines, and more generally long tubular structures, are major oil and gas industry tools used in exploration, drilling, production, and transmission. Installing and operating tubular structures in deep waters places unique demands on them. Technical challenges within the field have spawned significant research and development efforts in a broad range of areas. Volume I addresses problems of buckling and collapse of long inelastic cylinders under various loads encountered in the offshore arena. Several of the solutions are also directly applicable to land pipelines. The approach of Mechanics of Offshore Pipelines is problem oriented. The background of each problem and scenario are first outlined and each discussion finishes with design recommendations. * New and classical problems addressed - investigated through a combination of experiments and analysis * Each chapter deals with a specific mechanical problem that is analyzed independently * The fundamental nature of the problems makes them also applicable to other fields, including tubular components in nuclear reactors and power plants, aerospace structures, automotive and civil engineering structures, naval vehicles and structures

Book Description :

Offshore Pipelines covers the full scope of pipeline development from pipeline designing, installing, and testing to operating. It gathers the authors' experiences gained through years of designing, installing, testing, and operating submarine pipelines. The aim is to provide engineers and management personnel a guideline to achieve cost-effective management in their offshore and deepwater pipeline development and operations. The book is organized into three parts. Part I presents design practices used in developing submarine oil and gas pipelines and risers. Contents of this part include selection of pipe size, coating, and insulation. Part II provides guidelines for pipeline installations. It focuses on controlling bending stresses and pipe stability during laying pipelines. Part III deals with problems that occur during pipeline operations. Topics covered include pipeline testing and commissioning, flow assurance engineering, and pigging operations. This book is written primarily for new and experienced engineers and management personnel who work on oil and gas pipelines in offshore and deepwater. It can also be used as a reference for college students of undergraduate and graduate levels in Ocean Engineering, Mechanical Engineering, and Petroleum Engineering. * Pipeline design engineers will learn how to design low-cost pipelines allowing long-term operability and safety. * Pipeline operation engineers and management personnel will learn how to operate their pipeline systems in a cost effective manner. * Deepwater pipelining is a new technology developed in the past ten years and growing quickly.

Book Description :

Offshore oil and gas production was conducted throughout the entire 20th century, but the industry’s modern importance and vibrancy did not start until the early 1970s, when the North Sea became a major producer. Since then, the expansion of the offshore oil industry has been continuous and rapid. Pipelines, and more generally long tubular structures, are major oil and gas industry tools used in exploration, drilling, production, and transmission. Installing and operating tubular structures in deep waters places unique demands on them. Technical challenges within the field have spawned significant research and development efforts in a broad range of areas. Volume I addresses problems of buckling and collapse of long inelastic cylinders under various loads encountered in the offshore arena. Several of the solutions are also directly applicable to land pipelines. The approach of Mechanics of Offshore Pipelines is problem oriented. The background of each problem and scenario are first outlined and each discussion finishes with design recommendations. * New and classical problems addressed - investigated through a combination of experiments and analysis * Each chapter deals with a specific mechanical problem that is analyzed independently * The fundamental nature of the problems makes them also applicable to other fields, including tubular components in nuclear reactors and power plants, aerospace structures, automotive and civil engineering structures, naval vehicles and structures

Book Description :

Offshore oil and gas production was conducted throughout the entire 20th century, but the industry's modern importance and vibrancy did not start until the early 1970s, when the North Sea became a major producer. Since then, the expansion of the offshore oil industry has been continuous and rapid. Pipelines, and more generally long tubular structures, are major oil and gas industry tools used in exploration, drilling, production, and transmission. Installing and operating tubular structures in deep waters places unique demands on them. Technical challenges within the field have spawned significant research and development efforts in a broad range of areas. Volume I addresses problems of buckling and collapse of long inelastic cylinders under various loads encountered in the offshore arena. Several of the solutions are also directly applicable to land pipelines. The approach of Mechanics of Offshore Pipelines is problem oriented. The background of each problem and scenario are first outlined and each discussion finishes with design recommendations. * New and classical problems addressed - investigated through a combination of experiments and analysis * Each chapter deals with a specific mechanical problem that is analyzed independently * The fundamental nature of the problems makes them also applicable to other fields, including tubular components in nuclear reactors and power plants, aerospace structures, automotive and civil engineering structures, naval vehicles and structures.

Book Description :

Mechanics of Offshore Pipelines, Second Edition, Volume One: Buckling and Collapse gives engineers fundamental knowledge on principles surrounding the mechanical behavior of pipelines and long tubular structures in the oil and gas industry. Addressing common challenges pertaining to buckling and collapse under various offshore loads, the authors go through each challenge experimentally, with supporting and analyzing data to present the main limits encountered. Helpful to both the practicing engineer and the graduate level, the combined effort of analysis supplemented with numerical modeling helps engineers design procedures and guidelines to reproduce the best solution or solve problems using a nonlinear finite element code. Custom formulations are also included to help users gain a deeper understanding of each challenge. Rounding out with helpful appendices, including a glossary of terms, this book continues to deliver critical research and data to engineers that need to design, install and maintain efficient and safe offshore pipelines. Updated to include more practical aspects, such as failure of corroded pipes under external pressure and response of bi-material under bending Delves into cost-effective materials and installation techniques Covers guidelines, practicing methods and recommendations on maintenance and design Recommended as the "bible" for offshore pipelines Explains the full spectrum of classical challenges, such as inelastic structural mechanics and the newest technological demands

Book Description :

• Updated edition of a best-selling title • Author brings 25 years experience to the work • Addresses the key issues of economy and environment Marine pipelines for the transportation of oil and gas have become a safe and reliable way to exploit the valuable resources below the world’s seas and oceans. The design of these pipelines is a relatively new technology and continues to evolve in its quest to reduce costs and minimise the effect on the environment. With over 25years experience, Professor Yong Bai has been able to assimilate the essence of the applied mechanics aspects of offshore pipeline system design in a form of value to students and designers alike. It represents an excellent source of up to date practices and knowledge to help equip those who wish to be part of the exciting future of this industry.

Book Description :

The Offshore Pipeline Construction Industry: Activity Modeling and Cost Estimation in the United States Gulf of Mexico presents the latest technical concepts and economic calculations, helping engineers make better business decisions. The book covers flow assurance, development strategies on pipeline requirements and the construction service side with a global perspective. In addition, it focuses on one of the most underdeveloped, promising assets – the Gulf of Mexico. Pipeline construction and decommissioning estimation methods are examined with reliable data presented. A final section covers trends for oil, gas, bulk oil, bulk gas, service and umbilical pipelines for installation and decommissioning using correlation models. This book delivers a much-needed tool for the pipeline engineer to better understand the economical choices and alternatives to designing, constructing, and operating today’s offshore pipelines. Built with construction and decommissioning decision tools supported by reliable data and case studies Organized by parts, including a section devoted to Gulf of Mexico statistics and estimation methods Helps readers gain practical knowledge on strategies and cost models from a global pipeline perspective, including environmental and mitigation considerations

Book Description :

As deepwater wells are drilled to greater depths, pipeline engineers and designers are confronted with new problems such as water depth, weather conditions, ocean currents, equipment reliability, and well accessibility. Subsea Pipeline Design, Analysis and Installation is based on the authors' 30 years of experience in offshore. The authors provide rigorous coverage of the entire spectrum of subjects in the discipline, from pipe installation and routing selection and planning to design, construction, and installation of pipelines in some of the harshest underwater environments around the world. All-inclusive, this must-have handbook covers the latest breakthroughs in subjects such as corrosion prevention, pipeline inspection, and welding, while offering an easy-to-understand guide to new design codes currently followed in the United States, United Kingdom, Norway, and other countries. Gain expert coverage of international design codes Understand how to design pipelines and risers for today's deepwater oil and gas Master critical equipment such as subsea control systems and pressure piping

Book Description :

Pipelines and Risers

Book Description :

Offshore Pipelines ebook Collection contains 5 of our best-selling titles, providing the ultimate reference for every offshore pipeline professional's library. Get access to over 2000 pages of reference material, at a fraction of the price of the hard-copy books. This CD contains the complete ebooks of the following 5 titles: Bai, Subsea Pipelines and Risers, 9780080445663 Guo, Offshore Pipelines: Design, Installation, and Operation, 9780750678476 Kyriakides, Mechanics of Offshore Pipelines, 9780080467320 Chin, Computational Rheology: Pipeline, 9780884153207 Tiratsoo, Pipeline Pigging Technology, 2nd Edition, 9780872014268 *Five fully searchable titles on one CD providing instant access to the ULTIMATE library of engineering materials for pipeline professionals. *2000 pages of practical and theoretical pipeline information in one portable package. *Incredible value at a fraction of the cost of the print books

Book Description :

Pipeline engineering requires an understanding of a wide range of topics. Operators must take into account numerous pipeline codes and standards, calculation approaches, and reference materials in order to make accurate and informed decisions. A Quick Guide to Pipeline Engineering provides concise, easy-to-use, and accessible information on onshore and offshore pipeline engineering. Topics covered include: design; construction; testing; operation and maintenance; and decommissioning. Basic principles are discussed and clear guidance on regulations is provided, in a way that will prove useful to both engineers and students. Provides concise, easy-to-use, and accessible information on onshore and offshore pipeline engineering Topics covered include design, construction, testing, operation, maintenance and decommissioning Basic principles are discussed and clear guidance on regulations is provided

Book Description :

Subsea repairs and inspection are costly for petroleum and pipeline engineers and proper training is needed to focus on ensuring system strength and integrity. Subsea Pipeline Integrity and Risk Management is the perfect companion for new engineers who need to be aware of the state-of-the-art techniques. This handbook offers a "hands-on" problem-solving approach to integrity management, leak detection, and reliability applications such as risk analysis. Wide-ranging and easy-to-use, the book is packed with data tables, illustrations, and calculations, with a focus on pipeline corrosion, flexible pipes, and subsea repair. Reliability-based models also provide a decision making tool for day-to-day use. Subsea Pipeline Integrity and Risk Management gives the engineer the power and knowledge to protect offshore pipeline investments safely and effectively. Includes material selection for linepipe, especially selection of standard carbon steel linepipe Covers assessment of various types of corrosion processes and definition of anti-corrosion design against internal as well as external corrosion Gives process and flow assurance for pipeline systems including pipeline integrity management

Book Description :

The safety of the U.S. undersea pipeline system is a major national interest and concern, whether the concern focuses on risk to human life or the potential for environmental pollution and damage. Focusing primarily on the Gulf of Mexico system, this book reviews historical examples of pipeline failure, assesses the potential for future pipeline failures and the means of mitigating them, and considers the efficacy of existing safety systems and inspection procedures. It also identifies alternatives for improvements in the regulatory framework and in lawmaking.

Book Description :

The development of oil and gas fields offshore requires specialized pipeline equipment. The structures must be strong enough to with stand the harshest environments, and ensure that production is not interrupted and remains economically feasible. However, recent events in the Gulf of Mexico have placed a new importance on maintenance and reliability. A new section; Condition Based Maintenance (CBM), introduces the subject of maintenance, written by Tian Ran Lin, Queensland University of Technology, and Yong Sun, CSIRO Earth Science and Resource Engineering. Two of the main objectives of CBM is maximizing reliability while preventing major or minor equipment malfunction and minimizing maintenance costs. In this new section, the authors deal with the multi-objective condition based maintenance optimization problem. CBM provides two major advantages: (1) an efficient approach for weighting maintenance objectives, and (2) a method for specifying physical methods for achieving those objectives. Maintenance cost and reliability objectives are calculated based on proportional hazards model and a control limit CBM replacement policy. Written primarily for engineers and management personnel working on offshore and deepwater oil and gas pipelines, this book covers the fundamentals needed to design, Install, and commission pipeline projects. This new section along with a thorough update of the existing chapters represents a 30% increase in information over the previous edition. Covers offshore maintenance and maintenance support system Provides the fundamentals needed to design, Install, and commission pipeline project Methods and tools to deliver cost effective maintenance cost and system reliability New section on Condition-Based Maintenance written by Tian Ran Lin, Queensland University of Technology, and Yong Sun, CSIRO Earth Science and Resource Engineering (yong.sun@csiro.au)

Book Description :

Structural Mechanics and Design of Metal Pipes: A systematic approach for onshore and offshore pipelines presents a unified and systematic approach to understanding and analyzing the structural behavior of onshore and offshore metallic pipelines. Following an overview of pipeline engineering and pipe fabrication, the mechanics of elastic rings and cylinders is presented as a prelude to structural performance of metal pipes under various loading conditions, which involve pressure and structural loads. The book also discusses special topics, such as geohazards and strain-based design, large-diameter water pipelines, global buckling and mechanically-lined pipes, and outlines approaches for developing state-of-the-art finite element models. In all topics addressed in this book, the mechanical behavior of pipes is related with specific design methods for onshore and offshore pipelines. Reflects the author’s 30-year experience in structural mechanics of pipes and tubulars Describes the structural performance of onshore and offshore pipelines Addresses key features of pipe mechanics to both practicing engineers and researchers Covers a wide spectrum of pipe behavior from the pipe mill to service conditions Presents the background of structural design provisions in major pipeline standards

Book Description :

This book is about the various methods of installing rigid subsea/submarine pipelines, such as the common methods using S-lay, J-lay, and reel-lay vessels. Other methods like the surface tow, bottom pull, and various other pipeline tow methods are also utilized. It also addresses supplementary activities required as part of a pipeline installation program, such as pipe manufacture and coating, seabed intervention, riser installation, pipeline precommissioning, and pipeline repairs. This book was written for students and newcomers to the oil and gas industry who have little or no knowledge of pipeline construction. Unlike other technical books on pipelines, this one does not address the detailed design of pipelines. Instead, it provides an overview of construction methodologies for subsea pipelines. As such, this book will provide the readers with a different perspective by providing a practical and illustrative approach to explain and illustrate how subsea pipelines can be installed through various methods. The author has used examples from some of his past projects. Where available, he also highlighted the various aspects of the work, and in some cases, he has provided the lessons that he learned from his past experiences so that readers may learn from the author’s experiences too.

Book Description :

Download Offshore Platforms and Pipelines book written by B. K. Mazurkiewicz, available in PDF, EPUB, and Kindle, or read full book online anywhere and anytime. Compatible with any devices.

Book Description :

Download Offshore Pipeline Design Analysis and Methods book written by A. H. Mousselli, available in PDF, EPUB, and Kindle, or read full book online anywhere and anytime. Compatible with any devices.