Skip to main content

Extrusion

In Order to Read Online or Download Extrusion Full eBooks in PDF, EPUB, Tuebl and Mobi you need to create a Free account. Get any books you like and read everywhere you want. Fast Download Speed ~ Commercial & Ad Free. We cannot guarantee that every book is in the library!

Extrusion

Extrusion Book
Author : Anonim
Publisher : ASM International
Release : 2006
ISBN : 1615032630
Language : En, Es, Fr & De

GET BOOK

Book Description :

Download Extrusion book written by , available in PDF, EPUB, and Kindle, or read full book online anywhere and anytime. Compatible with any devices.

Aluminum Extrusion Technology

Aluminum Extrusion Technology Book
Author : Pradip K. Saha
Publisher : ASM International
Release : 2000
ISBN : 1615032452
Language : En, Es, Fr & De

GET BOOK

Book Description :

Download Aluminum Extrusion Technology book written by Pradip K. Saha, available in PDF, EPUB, and Kindle, or read full book online anywhere and anytime. Compatible with any devices.

Foam Extrusion

Foam Extrusion Book
Author : S.-T. Lee,Chul B. Park
Publisher : CRC Press
Release : 2014-04-07
ISBN : 1439898596
Language : En, Es, Fr & De

GET BOOK

Book Description :

Combining the science of foam with the engineering of extrusion processes, Foam Extrusion: Principles and Practice delivers a detailed discussion of the theory, design, processing, and application of degradable foam extraction. In one comprehensive volume, the editors present the collective expertise of leading academic, research, and industry specialists while laying the scientific foundation in such a manner that the microscopic transition from a nucleus to a void (nucleation) and macroscopic movement from a void to an object (formation) are plausibly addressed. To keep pace with significant improvements in foam extrusion technology, this Second Edition: Includes new chapters on the latest developments in processing/thermal management, rheology/melt strength, and biodegradable and sustainable foams Features extensive updates to chapters on extrusion equipment, blowing agents, polyethylene terephthalate (PET) foam, and microcellular innovation Contains new coverage of cutting-edge foaming mechanisms and technology, as well as new case studies, examples, and figures Capturing the interesting evolution of the field, Foam Extrusion: Principles and Practice, Second Edition provides scientists, engineers, and product development professionals with a modern, holistic view of foam extrusion to enhance research and development and aid in the selection of the optimal screw, die design, and foaming system.

Extrusion Problems Solved

Extrusion Problems Solved Book
Author : M N Riaz,G J Rokey
Publisher : Elsevier
Release : 2011-11-09
ISBN : 085709520X
Language : En, Es, Fr & De

GET BOOK

Book Description :

Extrusion is widely used for the preparation of a variety of foodstuffs including breakfast cereals, snack food and pasta, as well as pet food and animal and aquaculture feed. Extrusion problems solved provides responses to more than 300 frequently asked questions about the process of food extrusion and the techniques and equipment involved, in a practical question-and-answer format. The book is divided into twelve chapters for ease of reference: the opening chapters concentrate on introductory queries and on different components of an extruder system, followed by two chapters that help the reader select the correct type of extruder for a product. Chapters five and six discuss the impact of factors such as protein content and particle size on the extrusion process, while the use of pre-conditioners is discussed in chapter seven. The latter part of the book discusses specific types of extruder and die and knife assemblies, followed by a chapter on issues relating to drying extruded food products. The final chapter offers practical guidelines and rules of thumb for the most common issues relating to food and feed extrusion. Written by two leading experts in the field, Extrusion problems solved is an essential reference source and troubleshooting guide for professionals working in food, pet food and feed extrusion. It will also be a valuable training resource for students of extrusion. Offers practical guidelines and rules of thumb for the most common food and feed extrusion problems Chapters concentrate on introductory queries, types of extruder and components of extruder systems, knife assemblies, the use of pre-conditioners and issues in drying extruded food products Provides responses to more than 300 frequently asked questions about the processes, equipment and techniques of food extrusion in a practical question-and-answer format

Pharmaceutical Extrusion Technology

Pharmaceutical Extrusion Technology Book
Author : Isaac Ghebre-Selassie,Charles Martin
Publisher : CRC Press
Release : 2003-05-14
ISBN : 0824755200
Language : En, Es, Fr & De

GET BOOK

Book Description :

Pharmaceutical Extrusion Technology is the only resource to provide in-depth descriptions and analyses of the key parameters of extruders and extrusion processes. The book highlights the applicability of melt extrusion in pharmaceutical drug development and product manufacturing, including controlled release, dissolution rate and bioavailability enhancement, and granulation technology. It brings together the technical information necessary to develop and market pharmaceutical dosage forms that meet current quality and regulatory requirements and details extruder hardware and controls, process definition and troubleshooting of single and twin screw extrusion processes, and more.

Extrusion Cooking

Extrusion Cooking Book
Author : R Guy
Publisher : Woodhead Publishing
Release : 2001-07-09
ISBN : 9781855735590
Language : En, Es, Fr & De

GET BOOK

Book Description :

The first part of this book introduces extrusion technology. Chapters examine extruders and their use in thermal transitions of raw materials into functional forms for the manufacture of particular foods. They also offer valuable guidance on the range of extruders and how to select the correct one, as well as the basic requirements in a typical extrusion process. The second part looks at the application of extrusion in specific product groups. Each chapter examines the range of extruded products within the product group, the specific production issues to the products, and future trends.

Extrusion

Extrusion Book
Author : Harold F. Giles Jr,Eldridge M. Mount III,John R. Wagner, Jr.
Publisher : William Andrew
Release : 2004-12-31
ISBN : 0815517114
Language : En, Es, Fr & De

GET BOOK

Book Description :

Why is it important to get to equilibrium and how long does it take? Are there problems running polypropylene profiles on a single screw extruder? Does the job involve compounding color concentrates on a corotating twin screw extruder? This unique reference work is designed to aid operators, engineers, and managers in quickly answering such practical day-to-day questions in extrusion processing. This comprehensive volume is divided into 7 Parts. It contains detailed reference data on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. This reference is a practical guide to extrusion bringing together both the equipment and materials processing aspects. It provides basic and advanced topics about the thermoplastics processing in the extruder, for reference and training. Parts 1 û 3, emphasize the fundamentals, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. Parts 4 û 7 treat advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. Extensive applications in Part 7 cover such contemporary areas as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. Each chapter includes review topics.

Developments in the European Extrusion Industry

Developments in the European Extrusion Industry Book
Author : R. Hudson
Publisher : iSmithers Rapra Publishing
Release : 1995
ISBN : 9781859570357
Language : En, Es, Fr & De

GET BOOK

Book Description :

This report provides the reader with not only a review of technology developments but also a consideration of end-use market factors.

The Mechanics of Metal Extrusion

The Mechanics of Metal Extrusion Book
Author : William Johnson,Hideaki Kudō
Publisher : Manchester University Press
Release : 1962
ISBN : 0987650XXX
Language : En, Es, Fr & De

GET BOOK

Book Description :

Download The Mechanics of Metal Extrusion book written by William Johnson,Hideaki Kudō, available in PDF, EPUB, and Kindle, or read full book online anywhere and anytime. Compatible with any devices.

Extrusion Cooking Techniques

Extrusion Cooking Techniques Book
Author : Leszek Moscicki
Publisher : John Wiley & Sons
Release : 2011-01-11
ISBN : 352763410X
Language : En, Es, Fr & De

GET BOOK

Book Description :

Offering an engineering perspective and the latest information on the application of this rapidly expanding technique, this practical book covers the technology, engineering, materials and products, as well as economic and ecological aspects. In addition to the theory, it also utilizes case studies that can easily be put into industrial practice. Each step of the process is discussed in terms of sustainability, and all data complies with the EU and FTA environmental regulations. Invaluable reading for food chemists and technologists, process engineers, chemists in industry, agricultural scientists, and chemical engineers. From the Contents: * Engineering Aspects of Extrusion * Raw Materials in the Production of Extrudates * Production of Breakfast Cereals, Snack Pellets, Baby Food and more * Extrusion Technique in Confectionery * Pet Food and Aquafeed * Extrusion-Cooking in Waste Management and Paper Pulp Processing * Thermoplastic Starch * Expanders * Process Automation * Scale-Up of Extrusion-Cooking in Single-Screw Extruders

Channel Flow Ductile Extrusion and Exhumation in Continental Collision Zones

Channel Flow  Ductile Extrusion and Exhumation in Continental Collision Zones Book
Author : Richard D. Law,M. P. Searle,Laurent Godin
Publisher : Geological Society of London
Release : 2006
ISBN : 9781862392090
Language : En, Es, Fr & De

GET BOOK

Book Description :

This collection of 27 review and research papers provides an overview of the geodynamic concepts of channel flow and ductile extrusion in continental collision zones. The focal point for this volume is the proposal that the middle or lower crust acts as a ductile, partially molten channel flowing out from beneath areas of over-thickened crust, such as the Tibetan plateau, towards the topographic surface at plateau margins. This controversial proposal explains many features related to the geodynamic evolution of the plateau and, for example, extrusion and exhumation of the crystalline core of the Himalayan mountain chain to the south. In this volume thermal-mechanical models for channel flow, extrusion and exhumation are presented, and geological and geophysical evidence both for and against the applicability of such models to the Himalayan-Tibetan Plateau system, as well as older continental collision zones such as the Hellenides, the Appalachians and the Canadian Cordillera, are discussed.

Ultrasonic Extrusion

Ultrasonic Extrusion Book
Author : William B. Tarpley,Kenneth H. Yocom,Richard Pheasant
Publisher : Unknown
Release : 1961
ISBN : 0987650XXX
Language : En, Es, Fr & De

GET BOOK

Book Description :

Earlier work on the ultrasonic extrusion of lead and aluminum has been extended to the cold extrusion of plasticized ceramic compositions, resulting in significant improvements in increased extrusion rate (more than 100-fold), decreased extrusion pressure (2 to 10 fold), and in extruded specimen properties. It has also been found possible to extrude materials which are normally nonextrudable because of their low plasticizer or water content. Fused, ground alumina could be ultrasonically extruded with 15% less water than the minimum content without ultrasonics, and only 40 to 60% of that used in normal commercial practice. Significant improvement in the strength of as-extruded shapes, as well as reduced shrinkage and deformation in drying and firing, resulted. Compositions normally using 3 w/o ammonium alginate as a plasticizer can be extruded with 0.2 w/o plastizer when ultrasonically activated. It has been postulated that the ultrasonic effects observed are derived from reduction of surface friction, shear thinning of the thixotropic systems, particle orientation, surface-film rupture, and wetting phenomena. As-extruded specimen improvement was evidenced by a smoother surface and freedom from cracks, tearing, and peeling. When steel dies were used, abrasion of the die surface sometimes caused a superficially discolored surface in nonultrasonic extrusions. The comparable ultrasonic extrusions showed little or no discoloration as the ultrasonic power level was increased. Ultrasonically extruded specimens which were fired in the same kiln loading as their corresponding controls show small but consistent increases in fired density. Water absorption was approximately 75% of the control. The highest moduli of rupture in the fired specimens were found in the ultrasonic specimens even though these required only 25% of the extrusion pressure of the controls.

Hydrostatic Extrusion

Hydrostatic Extrusion Book
Author : N. Inoue,M. Nishihara
Publisher : Springer Science & Business Media
Release : 2012-12-06
ISBN : 9400949545
Language : En, Es, Fr & De

GET BOOK

Book Description :

This book is intended to be a reference text on hydrostatic extru sion, a multidisciplinary technology involving the forming process of materials, tribology, high pressure engineering and so forth. Until now only one book bearing the title of hydrostatic extrusion, by Prof. Alexander and Dr. Lengyel, has been published since 1971. Although there are chapters on hydrostatic extrusion in such books as THE MECHANICAL BEHAVIOUR OF MATERIALS UNDER PRESSURE edited by Dr. Pugh, METAL FORMING by Prof. Avitzur and HIGH PRESSURE TECHNOLOGY by Drs. Spain and Paauwe, it is regrettable that no up~to-date reference books on hydro static extrusion are available. As is well known, hydrostatic extrusion is a nearly-ideal lubricated extrusion. Its advantages have been demonstrated by laboratory research in the past two decades, yet many manufacturers, however, still hesitate to adopt the technology in their plants. Their hesitation is certainly due to the lack of exact information on the process and its equipment and also to 'their unfamiliarity with the actual method of operation. In order to provide a useful introduction to the subject for engi neers who work in industries which plan to employ this technique and also to give exact and reliable information on the durability and perfo- ance of production facilities, as well as the capabilities of the process and the properties of extruded products, we decided to publish this book. Starting with theories and computational methods, the processes of cold, warm and hot hydrostatic extrusion are described by experts in their respective fields.

Reactive Extrusion

Reactive Extrusion Book
Author : Günter Beyer,Christian Hopmann
Publisher : John Wiley & Sons
Release : 2018-01-11
ISBN : 352734098X
Language : En, Es, Fr & De

GET BOOK

Book Description :

This first comprehensive overview of reactive extrusion technology for over a decade combines the views of contributors from both academia and industry who share their experiences and highlight possible applications and markets. They also provide updated information on the underlying chemical and physical concepts, summarizing recent developments in terms of the material and machinery used. As a result, readers will find here a compilation of potential applications for reactive extrusion to access new and cost-effective polymeric materials, while using existing compounding machines.

Extrusion Processing Technology

Extrusion Processing Technology Book
Author : Jean-Marie Bouvier,Osvaldo H. Campanella
Publisher : John Wiley & Sons
Release : 2014-03-31
ISBN : 1118541723
Language : En, Es, Fr & De

GET BOOK

Book Description :

The only up-to-date book on this important technology, Extrusion Processing Technology: Food and Non-Food Biomaterials bridges the gap between the principles of extrusion science and the practical "know how" of operational engineers and technicians. Written by internationally renowned experts with over forty years of experience between them, this valuable reference for food scientists, food engineers, chemical engineers, and students includes coverage of new, greener technologies as well as case studies to illustrate the practical, real-world application of the principles in various settings.

Pharmaceutical Extrusion Technology

Pharmaceutical Extrusion Technology Book
Author : Isaac Ghebre-Sellassie,Charles E. Martin,Feng Zhang,James DiNunzio
Publisher : CRC Press
Release : 2018-03-05
ISBN : 1498704921
Language : En, Es, Fr & De

GET BOOK

Book Description :

The first edition of Pharmaceutical Extrusion Technology, published in 2003, was deemed the seminal book on pharmaceutical extrusion. Now it is expanded and improved, just like the usage of extrusion has expanded, improved and evolved into an accepted manufacturing technology to continuously mix active pharmaceutical ingredients with excipients for a myriad of traditional and novel dosage forms. Pharmaceutical Extrusion Technology, Second Edition reflects how this has spawned numerous research activities, in addition to hardware and process advancements. It offers new authors, expanded chapters and contains all the extrusion related technical information necessary for the development, manufacturing, and marketing of pharmaceutical dosage forms. Key Features: Reviews how extrusion has become an accepted technology to continuously mix active pharmaceutical ingredients with excipients Focuses on equipment and process technology Explains various extrusion system configurations as a manufacturing methodology for a variety of dosage forms Presents new opportunities available only via extrusion and future trends Includes contributions of experts from the process and equipment fields

Hydraulic Extrusion Presses

Hydraulic Extrusion Presses Book
Author : Ernst Müller
Publisher : Springer Science & Business Media
Release : 2012-12-06
ISBN : 3642530230
Language : En, Es, Fr & De

GET BOOK

Book Description :

The wide variety of hydraulic presses used for the manufacture of tubes, cable sheathing, rods, profiles, and wire in nonferrous metals has gone through an extraordinarily interesting development which commenced about 50 years ago after the advent of high-tensile hot working steels and has since adapted itself to the steadily growing de mands of the metalworking industry. This development has especially been promoted in Germany where many of the old presses are still in use for the extrusion of rods and tubes in heavy metals, and lead, already decades ago, to the construction of hydraulic presses which rank among the largest equipment built for noncutting shaping of metals. This book, therefore, draws in the main upon the German deve lopment, giving an account of the advances made in extrusion technique and press design and presenting to the reader the sum of the experience gathered. A great number of very instructive works dealing with the techno logical aspects in the extrusion of metals and the results obtained in metallurgical investigations has been published. These, it is true, contain important reference material regarding the design of presses and press tooling, but very few of them give a detailed description of the deve lopment and calculation of the machines or the requirements to be met by presses and tooling, so that the present book is to fill a gap in the existing literature.

Design of Extrusion Forming Tools

Design of Extrusion Forming Tools Book
Author : Olga Carneiro
Publisher : Smithers Rapra
Release : 2012-12-19
ISBN : 1847355196
Language : En, Es, Fr & De

GET BOOK

Book Description :

The design of extrusion forming tools (dies and calibrators) is a difficult task usually performed by the employment of experimental trial-and-error procedures, which can hinder the performance and cost of the tools, may increase the time to market of new extruded products and limit their complexity.This book provides detailed information on the design of extrusion forming tools. It describes the main problems to be faced when designing dies and calibrators, the most relevant polymer properties to be considered in the design process, the specific problems related to several types of conventional extrusion dies, and recent developments on the design of special dies and process modeling. It is an updated and unique book on the subject, where each chapter is prepared by internationally recognized experts. Having in mind its nature, it is expected to become a useful reference book for higher education students (both undergraduate and graduate ones), teachers, researchers and engineers active in the extrusion industry.

Polymer Extrusion

Polymer Extrusion Book
Author : Pierre G. Lafleur,Bruno Vergnes
Publisher : John Wiley & Sons
Release : 2014-05-09
ISBN : 1118827171
Language : En, Es, Fr & De

GET BOOK

Book Description :

Extrusion is by far the most important and the oldest processing and shaping method for thermoplastic polymers. This process concerns almost all synthetic polymers, as well as elastomers or food materials. Single-screw extrusion is mainly used nowadays to manufacture finished goods or semi-finished products. More than 90 million tons of thermoplastics are therefore processed every year. Twin-screw extrusion may be divided into two systems: contra-rotating systems used within the context of PVC extrusion, for the manufacture of pipes or profiles; and co-rotating systems experiencing nowadays a very significant development, because of their significant adaptability and flexibility, which enables the manufacture of specific materials (polymer alloys, thermoplastic elastomers, filled polymers, nanocomposites). Extrusion is carried out by passing molten polymer through a tool called die that will give the product its final shape (films and sheets, rolled products, and electric cables). Thanks to the design of dies, we obtain at the output a product with controlled dimensions, uniform speeds and homogeneous temperatures. The book will discuss the same production types, but only in the case of coextrusion flows, i.e. multilayer stratified products. First of all, we will present in this book the physics of the mechanisms at stake, then propose more or less complex models in order to describe these mechanisms and then go forward in the interpretation of results and the control of condition flows.

Dry Full Forward Extrusion by Textured Workpieces and Self Lubricating Tool Coatings

Dry Full Forward Extrusion by Textured Workpieces and Self Lubricating Tool Coatings Book
Author : Rafael Hild
Publisher : Apprimus Wissenschaftsverlag
Release : 2020-09-30
ISBN : 3863599055
Language : En, Es, Fr & De

GET BOOK

Book Description :

Aus ökonomischen, ökologischen und legislativen Gründen ist es notwendig Schmierstoffe zu substituieren. Insbesondere in der Kaltmassivumformung ist dies aufgrund von hohen Belastungen schwer umsetzbar. Der Ansatz dieser Dissertation ist es mithilfe einer vom Institut für Oberflächentechnik entwickelten Werkzeugbeschichtung und einer Texturierung der Halbzeuge eine Trockenumformung zu ermöglichen. Die Ergebnisse haben eine Machbarkeit gezeigt, jedoch ist adhäsiver Verschleiß ein Problem.