Skip to main content

Designing Plastic Parts For Assembly

Download Designing Plastic Parts For Assembly Full eBooks in PDF, EPUB, and kindle. Designing Plastic Parts For Assembly is one my favorite book and give us some inspiration, very enjoy to read. you could read this book anywhere anytime directly from your device.

Designing Plastic Parts for Assembly

Designing Plastic Parts for Assembly Book
Author : Paul A. Tres
Publisher : Unknown
Release : 2014-10-01
ISBN : 9781569905555
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

Download Designing Plastic Parts for Assembly book written by Paul A. Tres, available in PDF, EPUB, and Kindle, or read full book online anywhere and anytime. Compatible with any devices.

Plastic Part Design for Injection Molding

Plastic Part Design for Injection Molding Book
Author : Robert A. Malloy
Publisher : Carl Hanser Verlag GmbH Co KG
Release : 2012-11-12
ISBN : 3446433740
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

The goal of the book is to assist the designer in the development of parts that are functional, reliable, manufacturable, and aesthetically pleasing. Since injection molding is the most widely used manufacturing process for the production of plastic parts, a full understanding of the integrated design process presented is essential to achieving economic and functional design goals. Features over 425 drawings and photographs. Contents: Introduction to Materials. Manufacturing Considerations for Injection Molded Parts. The Design Process and Material Selection. Structural Design Considerations. Prototyping and Experimental Stress Analysis. Assembly of Injection Molded Plastic Parts. Conversion Constants.

Designing Plastic Parts for Assembly

Designing Plastic Parts for Assembly Book
Author : Paul A. Tres
Publisher : Unknown
Release : 2021-02-19
ISBN : 9781569908204
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

Download Designing Plastic Parts for Assembly book written by Paul A. Tres, available in PDF, EPUB, and Kindle, or read full book online anywhere and anytime. Compatible with any devices.

The First Snap fit Handbook

The First Snap fit Handbook Book
Author : Paul R. Bonenberger
Publisher : Unknown
Release : 2005-01-01
ISBN : 9783446227538
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

Download The First Snap fit Handbook book written by Paul R. Bonenberger, available in PDF, EPUB, and Kindle, or read full book online anywhere and anytime. Compatible with any devices.

Designing with Plastics

Designing with Plastics Book
Author : Gunter Erhard
Publisher : Carl Hanser Verlag GmbH Co KG
Release : 2013-03-18
ISBN : 3446412824
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

"Designing with Plastics" is an indispensable tool for every engineer and designer working with plastic materials. It will assist in the development of plastic parts that are not only functional and esthetically pleasing but also manufacturable while meeting ever increasing end-use requirements. The short but concise introduction into the specific properties of this material class focuses on the practical needs of the designer and lays the foundation for the following in-depth discussion of part design suitable for production and the intended end-use application. Numerous detailed examples highlight practical tips and rules of thumb for successful part design. Content: - Structure and Properties - Properties of Generic Polymeric Materials - Physical Properties - Characteristic Values - Test Methods and Procedures - Geometrically Simple Structural Parts under Static Loads - Design and Material Considerations for Parts Subjected to Mechanical Loads - Designing for Production - Flexing Elements - Mechanical Fasteners - Ribbed Structures - Gear Wheels - Friction Bearings - Wheels and Rollers

Introduction to Plastics Engineering

Introduction to Plastics Engineering Book
Author : Vijay K. Stokes
Publisher : John Wiley & Sons
Release : 2020-04-02
ISBN : 1119536529
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

The authoritative introduction to all aspects of plastics engineering — offering both academic and industry perspectives in one complete volume. Introduction to Plastics Engineering provides a self-contained introduction to plastics engineering. A unique synergistic approach explores all aspects of material use — concepts, mechanics, materials, part design, part fabrication, and assembly — required for converting plastic materials, mainly in the form of small pellets, into useful products. Thermoplastics, thermosets, elastomers, and advanced composites, the four disparate application areas of polymers normally treated as separate subjects, are covered together. Divided into five parts — Concepts, Mechanics, Materials, Part Processing and Assembly, and Material Systems — this inclusive volume enables readers to gain a well-rounded, foundational knowledge of plastics engineering. Chapters cover topics including the structure of polymers, how concepts from polymer physics explain the macro behavior of plastics, evolving concepts for plastics use, simple mechanics principles and their role in plastics engineering, models for the behavior of solids and fluids, and the mechanisms underlying the stiffening of plastics by embedded fibers. Drawing from his over fifty years in both academia and industry, Author Vijay Stokes uses the synergy between fundamentals and applications to provide a more meaningful introduction to plastics. Examines every facet of plastics engineering from materials and fabrication methods to advanced composites Provides accurate, up-to-date information for students and engineers both new to plastics and highly experienced with them Offers a practical guide to large number of materials and their applications Addresses current issues for mechanical design, part performance, and part fabrication Introduction to Plastics Engineering is an ideal text for practicing engineers, researchers, and students in mechanical and plastics engineering and related industries.

Robust Plastic Product Design A Holistic Approach

Robust Plastic Product Design  A Holistic Approach Book
Author : Vikram Bhargava
Publisher : Carl Hanser Verlag GmbH Co KG
Release : 2017-12-11
ISBN : 1569905819
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

Tooling, molding, secondary operations, material selection, evaluation and testing, design, project management, costing, value engineering, international supplier management and enhancement, and more: this book provides a broad insight from the author’s over 40 years of experience in the plastics industry. Aimed at both technical and non-technical personnel involved with plastic product design and manufacturing, this book shows how having the big picture leads to effective solutions and high-quality products. Numerous case studies of product failures exemplify the key concepts. The reader will benefit from the author’s unique depth and breadth of knowledge and experience as a team manager and hands-on contributor in all aspects of plastics, involving extremely robust, mission-critical products. Judicious attention to fundamental engineering principles is always at the foundation but “people issues” are also brought into focus from the author’s background as a long-time international trainer and Six Sigma expert. The book is therefore an essence of all the experience gained along the way: the good, the bad, and the ugly. This book is unique among the many other fine books available in this subject area in that it is the perspective of one who has been in the trenches—as opposed to an academician, scientist, or other professional from a field with narrower scope, such as material science, tooling, or manufacturing. Hence, the HOLISTIC APPROACH. Contents: • Causes of Plastics Failure • The Holistic Approach • Plastic Materials • Design • Tooling Considerations • Processing • Secondary Operations • Part and Tool Costs • Six Sigma Techniques in Plastics • Further Reading and Reference Material With forewords by Glenn Beall, Louis Maresca, and Joe McFadden.

Injection Molds for Beginners

Injection Molds for Beginners Book
Author : Rainer Dangel
Publisher : Carl Hanser Verlag GmbH Co KG
Release : 2020-04-06
ISBN : 1569908192
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

This applications-oriented book describes the construction of an injection mould from the ground up. Included are explanations of the individual types of tools, components, and technical terms; design procedures; techniques, tips, and tricks in the construction of an injection mould; and pros and cons of various solutions. Based on a plastic part ("bowl with lid") specially developed for this book, easily understandable text and many illustrative pictures and drawings provide the necessary knowledge for practical implementation. Step by step, the plastic part is modified and enhanced. The technologies and designs that are additionally needed for an injection mould are described by engineering drawings. Maintenance and repair, and essential manufacturing techniques are also discussed. Now if full color, this second edition builds on the success of the first, with updates and small corrections throughout, as well as an new expanded section covering the process chain.

Design and Manufacturing of Plastics Products

Design and Manufacturing of Plastics Products Book
Author : Antonio Pouzada
Publisher : Elsevier
Release : 2021-08-17
ISBN : 0128197757
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

Design and Manufacturing of Plastics Products: Integrating Conventional Methods and Innovative Technologies brings together detailed information on design, materials selection, properties, manufacturing, and the performance of plastic products, incorporating the utilization of the latest novel techniques and additive manufacturing technologies. The book integrates the design of molded products and conventional manufacturing and molding techniques with recent additive manufacturing techniques to produce performant products and cost-effective tools. Key areas of innovation are explained in detail, including hybrid molds, the integration of processing options with product properties and performance, and sustainability factors such as eco-design strategies, recycling, and lifecycle assessment. Other sections cover the development of plastics products, including design methodologies, design solutions specific to plastics, and design for re-use, as well as manufacturing and performance, with an emphasis on thermoplastic molding techniques, recent advances on plastics tooling, and the appraisal of the influence of processing options on product performance. This is a valuable resource to plastics engineers, design engineers, mold makers, and product or part designers across industries. It will also be of interest to researchers and advanced students in plastics engineering, polymer science, additive manufacturing and mechanical engineering. Offers a thorough grounding in plastics part design, thermoplastic material selection, properties, manufacture and performance of plastic parts Presents the latest advances, including the integration of additive manufacturing in the plastics product development cycle, hybrid molds, and lifecycle and recycling considerations Enables the reader to utilize traditional methods alongside cutting-edge technologies in the production of performant plastic products and parts

Designing Plastic Parts for Assembly

Designing Plastic Parts for Assembly Book
Author : Paul A. Tres
Publisher : Carl Hanser Verlag GmbH Co KG
Release : 2019-06-11
ISBN : 1569907161
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

For over 22 years, Designing Plastic Parts for Assembly has been the definitive guide for both seasoned part designers and novices to the field, facilitating cost-effective design decisions and ensuring that the plastic parts and products will stand up under use. The detailed yet simplified discussion of material selection, manufacturing techniques, and assembly procedures enables the reader to evaluate plastic materials and design plastic parts with confidence. Good joint design and implementation, the geometry and nature of the component parts, the types of load involved, and other fundamental information necessary for a successful outcome are all included. Throughout, the treatment is practice-oriented and focused on everyday problems and situations. The 8th edition introduces a completely new chapter on fasteners, including discussion and evaluation of thread forming and thread cutting screws, with accompanying examples. New case histories in the fields of elasticity and annular snap fits that illustrate the hazardous consequences of inadequate part design are also included. Contents: - Understanding Plastic Materials - Understanding Safety Factors - Strength of Material for Plastics - Nonlinear Considerations - Welding Techniques for Plastics - Press Fitting - Living Hinges - Snap Fitting - Bonding - In-Mold Assembly - Fasteners

Joining of Plastics

Joining of Plastics Book
Author : Jordan Rotheiser
Publisher : Carl Hanser Verlag GmbH Co KG
Release : 2015-05-07
ISBN : 3446445951
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

The third edition of this comprehensive handbook emphasizes the relationship between the assembly methods, the materials, and the plastics manufacturing processes, thus enabling the reader to identify the best design/assembly method for a given application. The book has been completely updated and a new chapter on laser welding of plastics was added. All principal fastening and joining methods used to assemble plastic parts today are described with their particular advantages and disadvantages. Assembly method limitations for a given material and/or a given molding process are discussed in great detail. This is very much a "how-to" book, offering a wealth of hard-to-find detailed information. Contents: - Rapid Guidelines for Assembly of Plastics and Efficient Use of the Handbook - Designing for Efficient Assembly - Cost Reduction in Assembly - Design for Disassembly and Recycling - Assembly Method Selection by Material - Assembly Method Selection by Process - Adhesive and Solvent Joining - Fasteners and Inserts - Hinges - Hot Plates/Hot Die/Fusion and Hot Wire/Resistance Welding - Hot Gas Welding - Induction/Electromagnetic Welding - Insert and Multi-Part Welding - Press Fits/Force Fits/Interference Fits/Shrink Fits - Snap Fits - Spin Welding - Staking/Swaging/Peening/Cold Heading/Cold Forming - Threads: Tapped and Molded-In - Ultrasonic Welding - Vibration Welding - Laser Welding

Tool and Manufacturing Engineers Handbook Plastic Part Manufacturing

Tool and Manufacturing Engineers Handbook  Plastic Part Manufacturing Book
Author : Philip Mitchell
Publisher : Society of Manufacturing Engineers
Release : 1996-12-09
ISBN : 0872634566
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

This volume focuses on the practical application of processes for manufacturing plastic products. It includes information on design for manufacturability (DFM), material selection, process selection, dies, molds, and tooling, extrusion, injection molding, blow molding, thermoforming, lamination, rotational molding, casting, foam processing, compression and transfer molding, fiber reinforced processing, assembly and fabrication, quality, plant engineering and maintenance, management.

Advances on Mechanics Design Engineering and Manufacturing III

Advances on Mechanics  Design Engineering and Manufacturing III Book
Author : Lionel Roucoules,Manuel Paredes,Benoit Eynard,Paz Morer Camo,Caterina Rizzi
Publisher : Springer Nature
Release : 2021-04-21
ISBN : 3030705668
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

This open access book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), held as a web conference on June 2–4, 2020. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is organized into four main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.

Plastics Products Design Handbook Materials and components

Plastics Products Design Handbook  Materials and components Book
Author : Edward Miller
Publisher : Marcel Dekker Incorporated
Release : 1981
ISBN : 0987650XXX
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

Download Plastics Products Design Handbook Materials and components book written by Edward Miller, available in PDF, EPUB, and Kindle, or read full book online anywhere and anytime. Compatible with any devices.

Moldflow Design Guide

Moldflow Design Guide Book
Author : Jay Shoemaker
Publisher : Unknown
Release : 2006-01-01
ISBN : 9783446406407
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

Download Moldflow Design Guide book written by Jay Shoemaker, available in PDF, EPUB, and Kindle, or read full book online anywhere and anytime. Compatible with any devices.

Product Design for Manufacture and Assembly

Product Design for Manufacture and Assembly Book
Author : Geoffrey Boothroyd,Peter Dewhurst,Winston A. Knight
Publisher : CRC Press
Release : 2010-12-08
ISBN : 1420089285
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

Hailed as a groundbreaking and important textbook upon its initial publication, the latest iteration of Product Design for Manufacture and Assembly does not rest on those laurels. In addition to the expected updating of data in all chapters, this third edition has been revised to provide a top-notch textbook for university-level courses in product

Design for Manufacturing

Design for Manufacturing Book
Author : Corrado Poli
Publisher : Elsevier
Release : 2001-11-29
ISBN : 0080503942
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

Design for Manufacturing assists anyone not familiar with various manufacturing processes in better visualizing and understanding the relationship between part design and the ease or difficulty of producing the part. Decisions made during the early conceptual stages of design have a great effect on subsequent stages. In fact, quite often more than 70% of the manufacturing cost of a product is determined at this conceptual stage, yet manufacturing is not involved. Through this book, designers will gain insight that will allow them to assess the impact of their proposed design on manufacturing difficulty. The vast majority of components found in commercial batch-manufactured products, such as appliances, computers and office automation equipment are either injection molded, stamped, die cast, or (occasionally) forged. This book emphasizes these particular, most commonly implemented processes. In addition to chapters on these processes, the book touches upon material process selection, general guidelines for determining whether several components should be combined into a single component or not, communications, the physical and mechanical properties of materials, tolerances, and inspection and quality control. In developing the DFM methods presented in this book, he has worked with over 30 firms specializing in injection molding, die-casting, forging and stamping. Implements a philosophy which allows for easier and more economic production of designs Educates designers about manufacturing Emphasizes the four major manufacturing processes

Plastics Handbook

Plastics Handbook Book
Author : Tim A. Osswald,Erwin Baur,Natalie Rudolph
Publisher : Carl Hanser Verlag GmbH Co KG
Release : 2019-01-28
ISBN : 1569905606
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

The Plastics Handbook provides everything important there is to know about plastics, comprehensively compiled in a compact and well-organized format. From material properties to machines, processing, and applications, the user will find detailed information that allows the successful implementation of new materials and technologies. This concise, competent, modern reference not only explains the basic facts and interrelationships, but also serves as a practical guide for engineers to help them succeed in today's challenging, global industrial world. Searching for specific materials, properties, or any other information is particularly easy, because the reader also has free access to the electronic version of the book. The 5th edition is comprehensively updated throughout, with a new clearer layout. Also now in full color! Contents: - Common Acronyms in Plastics Technology - Introduction (Economic Significance, Classification, Composition, Effects of Processing on Properties, Modifications of Plastic Materials) - Material Properties and Testing Methods - Plastic Processing Technologies - Plastic Materials - Additives, Fillers, and Fibers - Material Properties Overview

Injection Molding Handbook

Injection Molding Handbook Book
Author : Tim A. Osswald,Lih-Sheng Turng,Paul J. Gramann
Publisher : Hanser Gardner Publications
Release : 2008
ISBN : 9781569904206
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

The Injection Molding Handbook provides engineers, professionals and other involved in this important industry sector with a thorough up-to-date overview of injection molding processing equipment and techniques, including the basic fundamental information on chemistry, physics, material science and process engineering. It covers all components of the injection molding machine and the various process steps. Topics directly affecting injection molding, such as material selection, process control, simulation, design and troubleshooting complete this reference book for the injection molder. The updated second edition handbook presents a well-rounded overview of the underlying theory governing the various injection molding processes without loosing its practical flavor.

Injection Mold Design Engineering

Injection Mold Design Engineering Book
Author : David O. Kazmer
Publisher : Carl Hanser Verlag GmbH Co KG
Release : 2012-11-12
ISBN : 3446434194
Language : En, Es, Fr & De

DOWNLOAD

Book Description :

This book provides a vision and structure to finally synergize all the engineering disciplines that converge in the mold design process. The topics are presented in a top-down manner, beginning with introductory definitions and the "big picture" before proceeding to layout and detailed design of molds. The book provides very pragmatic analysis with worked examples that can be readily adapted to "real world" mold design applications. It should help students and practitioners to understand the inner workings of injection molds and encourage them to think "outside the box" in developing innovative and highly functional mold designs. Contents: · Introduction to mold functions, types, and components · Review of design for injection molding · Cost estimation and optimization · Mold layout design including cavity layout, sizing, and materials selection · Cavity, runner system, and gating analysis and design · Cooling system analysis and design · Venting, shrinkage, and warpage analysis and strategies · Ejection force analysis and ejection system designs · Stress and deflection analysis with structural system designs · A survey of advanced mold designs